WIND ALARM CONTROLLER
FEATURES:
- Rugged
- Dual set point alarms
- Dual warning lights
- Ideal for monitoring wind conditions for cranes, water fountains, and other wind sensitive applications
Rating
0 vote
Favoured:
0
Listing Details
Product Description
| The dual set point Wind Alarm Controller provides both warning for and control of wind-sensitive equipment, cranes, water fountains, etc... Can be used to alert you to high or low wind speeds and can be factory calibrated in MPH, km/h or Knots. To operate the wind alarm controller, set the thumb-wheel switches to your desired levels. When wind speed achieves or exceeds the first wind speed alarm control setting for 3 seconds, a yellow warning light illuminates and one internal SPDT relay activates. When the wind speed achieves or exceeds the second wind speed alarm control setting for 3 seconds, a red light illuminates, a 90dB piezo buzzer sounds, and the second internal SPDT relay is activated. The Wind Alarm Controller is housed in a 6.3"H x 4.72"W x 3.29"D weathertight polycarbonate case and utilizes a non micro-processor circuit to minimize occurrence of latch-up. It is accurate to +/- 2 MPH and operates on 12 volts DC, with an AC adaptor available as an option. |
Specification
|
Accuracy: + 2 MPH LED Window: 2 digits, 1x1 inch window Cup Type: 3 cup generator type Cable: 22 AWG, 2-conductor, Non-PVC jacketed, 60ft included NOTE: Sensor will operate on up to 500ft of 22 AWG wire. Input Voltage: 12VDC, AC adaptor available as an option Alarm Output: 2 SPDT Outputs, Yellow LED, 90dB Piezo Buzzer, Red LED Dimensions: 6.3x4.72x3.29 inch (16x12x8.4 cm) Weight: 4.3lbs (2kg) |
File
File
Reviews (0)